Filter
Top Products
Operation
56
FUNCTION DESCRIPTION
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 43 for details.
Audio
Settings
Allows you to enter the audio setting menu.
Mute
Sets the mute function.
Volume
Adjusts the audio volume level.
power on/off ring tone
Lamp
Settings
Lamp mode
See "Setting Lamp mode eco function as Economic or Smart Eco
mode" on page 60 for details.
Reset lamp timer
See "Resetting the lamp timer" on page 64 for details.
Equivalent lamp hour
See "Getting to know the lamp hour" on page 60 for details on how
the total lamp hour is calculated.
Security
Settings
Change password
You will be asked to enter the current password before changing to a
new one.
Change Security Settings
Power on lock
See "Securing the projector" on page 30 for details.
Splash Sscreen On Lock
When Splash screen lock is activated, My Screen cannot be used
unless the correct password is entered every time when you attempt
to capture screen.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update
or download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern
Selecting On enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check
that the projected image is free from distortion. See "Use build-in
test pattern" on page 27 for details.
5. SYSTEM SETUP: Advanced menu
Downloaded from www.Manualslib.com manuals search engine