Filter
Top Products
Operation
60
i. You can select Video or Graphic display mode. Graphic Mode: worse image
quality but faster tramsmission speed. Video Mode: better image quality but
slower transmission speed. However, the actual transmission performance was
determined by the status of network usage at that time.
ii. You can select whether to activate compatible mode.
iii. You can select whether to automatically open the Q Presenter application when
the computer is powered on.
iv. When you install the Q Presenter, the program will automatically identify the
language of your computer’s operating system and install the same language as
your operating system. If your language isn’t included, the system will keep
English as the default setting.
v. You can link to the BenQ remote network operation page on page 48.
Using the projection login code
This function is designed to ensure network display through the correct projector. To
toggle this function:
1. Go to the SYSTEM SETUP: Advanced > Network Settings menu after
opening the OSD menu system. Press MODE/ENTER.
2. Press to highlight Projection Log In Code and press / to select On or
Off.
When this function is on, the projector
generates a random 4-digit code in the
upper right corner when you switch the
source to Network Display. You need
to key in this 4-digit code in the Q
Presenter when connecting to the
projector.