Important Safety Instructions 1
Important Safety Instructions
Caution
• To prevent shock, do not open the
cabinet. No user-serviceable parts
inside.
• Please read this user’s manual before
you operate your projector. Save this
user’s manual for future reference.
• Do not look straight at the projector
lens during operation. The intense
light beam may damage your eyes.
• Refer servicing to qualified service
personnel.
• Always open the lens shutter or
remove the lens cap when the
projector lamp is on.
•In some countries, the line voltage is
NOT stable. This projector is
designed to operate safely within a
bandwidth of 100 to 240 volts, but
could fail if power cuts or surges of
±10 volts occur. In these high-risk
areas, it is recommended to install a
power stabilizer unit.