Filter
Top Products
23
Using the projector and remote control
English
PIP ---
POP ---
Tur nin g th e power off
Follow the steps below.
1. Press the POWER button on the projector or remote control and a
warning message appears. To turn the projector off, press POWER
again.
2. The Power indicator light flashes green and the fans run for about two
minutes to cool the lamp. The projector will not respond to any
commands until the cooling process is complete.
3. Then, the Power indicator light is a steady orange once the cooling
process has finished and fans stop.
4. If the projector will not be used for an extended period, turn the main
power switch off and unplug the power cable from the power outlet.
Sub-window
Main window
Right window
Left window
If You Want To Shut Down The Projector,
Press The Power Key Again
To Perform The Shut Down Process.
PE7700-e.book Page 23 Monday, January 10, 2005 11:20 AM