Filter
Top Products
BENQ Corporation
8
3.1 Status
Status
The current state of the driver is displayed in this screen. If the state reveals
“Associated,“ it means that the normal flow of operation is in Infrastructure mode.
This shows that the PC is already connected to access point and BSSID is also
shown in the form of hex digits. At the same time, the networking is available for the
device.
In “Scanning ” state, it means that the node cannot detect the SSID to an access
point within range and is searching for an available access point. Also, if the driver
failed to initiate for some unknown reasons, this field will display an error message.
Rescan
The driver will restart and beginning its Connection Procedure if the Rescan button
is pressed. In general, the connection procedure will be different according to the
Mode of the driver.
Enable / Disable Radio
This button is used to enable or disable the radio of AWL100.