Billion Electric Company 3013G Network Card User Manual


  Open as PDF
of 5
 
Billion BiPAC 3013G 54Mbps 802.11g Wireless USB Adapter
- 5 -
Connect this adapter to your AP quickly
1. Double click the icon on your desktop.
2. Make sure that the “Windows Zero Config” checkbox is unchecked.
3. Click the “Available Network” button to scan available access points. Double click on the
AP that you are going to connect to.
4. Click the OK button to confirm that you are connecting to an open wireless network.
5. Click OK to add this network into the profile list.
Note: This example is an open wireless network. If you are going to connect to an
AP with security protection, you will have to configure the encryption settings in
this profile to be corresponding to your AP. Please click on the “Network
Authentication” drop list to select an authentication method, and then select a
“Data encryption” type. Fill in each required blanks and click “OK”.
Product Support and Contact Information
Most problems can be solved by referring to the Troubleshooting section in the User’s Manual. If you
cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you
purchased this product.
Contact Billion
WORLDWIDE
http://www.billion.com
 previous