Filter
Top Products
VoIP/(802.11g) Broadband Firewall Router
Configuring Your Broadband Router
Verifying Your Local Network Connection with the Device
To configure this device, you must have IE 5.0 / Netscape 4.5 or
above installed
To see if this Router is visible on
the local network, go to Start /
Run. In the Run dialog box, type
“ping 192.168.1.254” then
press OK.
A command prompt window will
pop out. If your ping is
successful which means your
local network is able to reach to
the device, then the command
prompt window will close up
automatically.
Connection fails, when you see
“Request timed out” in the
command prompt window. You
may need to check your set up.
9