Billion Electric Company 7202GR2 Network Router User Manual


 
Chapter 3
Installation
You can configure the BiPAC 7202 Series router through the convenient and user-friendly
interface of a web browser. Most popular operating systems such as Linux and Windows
98/NT/2000/XP/Me include a web browser as a standard application.
3.1 Before Configuration
PCs must have a properly installed Ethernet interface and connect to the router directly or
through an external repeater hub. In addition, PCs must have TCP/IP installed and
configured to obtain an IP address through a DHCP server or a fixed IP address that must be
in the same subnet as the router. The default IP address of the router is 192.168.1.254 and
the subnet mask is 255.255.255.0 (i.e. any attached PC must be in the same subnet, and
have an IP address in the range of 192.168.1.1 to 192.168.1.253). The easiest way is to
configure the PC to obtain an IP address automatically from the router using DHCP. If you
encounter any problems accessing the router’s web interface you are advised to uninstall
any kind of software firewall on your PCs, as they can cause problems accessing the
192.168.1.254 IP address of the router.
Please follow the steps below for installation on your PC’s network environment. First of all,
check your PC’s network components. The TCP/IP protocol stack and Ethernet network
adapter must be installed. If not, please refer to your Windows-related or other operating
system manuals.
Any TCP/IP capable workstation can be used to communicate with o
r
through the BiPAC 7202 Series. To configure other types of
workstations, please consult the manufacturer’s documentation.
12