Rev. 1.05
- 20 -
SRP-270
5. Fine Tuning
5-1 Dip Switch Adjustment
The dip switches can be used to select the following printer functions.
- Emulation
- Auto Cutter, Font Interval, Auto Line Feed
- Serial Communications Settings, Hexa-Printing
The dip switches are located on the under side of the printer.
Dip switch adjustment instructions are as follows.
1) Turn off the printer power.
2) Turn the printer over and remove the dip switch cover.
3) Use a pointy edged object to adjust the dip switches.
(Refer to the following diagram for functions per switch.)
4) New settings take effect when turning the printer back on.