Filter
Top Products
Rev. 1.00
- 18 -
SRP-F310/312
4. Specification
Printing method Thermal line printing
Dot density
SRP-F310: 180dpi(7dots/mm)
SRP-F312: 203dpi(8dots/mm)
Printing width SRP-F310:72mm, SRP-F312:80mm
Paper width 80mm/83mm
Characters per line (default)
SRP-F310: 42(Font A), 56(Font B)
SRP-F312: 48(Font A), 64(Font B)
Printing speed
SRP-F310: 63.82 lines/sec, 270 mm/sec
SRP-F312: 72 lines/sec, 270mm/sec
Receive Buffer Size 4K Bytes
※ NOTE : Printing speed may be slower, depending on the data transmission
speed and the combination of control commands.
SMPS Input voltage 100~240VAC
Frequency
50/60Hz
Supply voltage
SMPS Output voltage
24VDC
Temperature
0 ~ 45 (Operating)℃
-20 ~ 60 (Storage)℃
Environmental
Conditions
Humidity
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
Mechanism Head 150 Km
LIFE *
Auto Cutter 1,800,000 Cut
MCBF * Mechanism 70,000,000 lines
* These values are calculated under printing level 2 with recommended paper at normal
temperature.
* These values may vary with environment temperature, printing level, etc.
** This equipment is indooruse and all the communication hiring are limited to inside of the
building.