Filter
Top Products
Model AC1030A
8
3. Operation
When the AC1030A is configured as a Splitter, both LED’s on the front
panel (labeled A and B) will be lit and the push-button switches are
disabled.
Alternatively, if the unit is acting as a Switch, only on of the LED’s on
the front panel will be lit. Use the push-buttons on the front panel to
select the input channel to be routed to the output. By default, upon
power-on reset, channel 1 is selected.
Note that the unit can also be used for Composite Video signals, which
only require one connection for each port. In this case, we recommend
that you use the Y connector on each port.