Filter
Top Products
724-746-5500 | blackbox.com
Chapter 5: Operation and Control
Page 20
5.6 Operating the Unit through the RS-232 Connection
Table 5-2. Operating the Matrix Switch through an RS-232 Connection
Command
Types Command Codes Functions
System
Command
/*Type; Acquires the model‘s information.
/+xxxxxxxx; Rewrites the passwords; must be eight digits.
/%Lock Locks the keyboard
/%Unlock Unlocks the keyboard
/:BellOff Turns off the buzzer.
/:BellOn; Turns on the buzzer.
/^Version Acquires the version of software
[x1]All. Transfer signals from input channel [x1] to all output channels
Operation
Command
All#. Transfers all input signals to matching output channels.
All$. Switches off all output channels
[x1]#. Transfers signals from input channel [x1] to output
[X1]*[X2]$ Transfers audio signals from input channel [x1] to output channel [x2].
[X1]*[X2]% Transfers video signals from input channel [x1] to output channel [x2].
[X1]*[X2]& Transfers video signals from input channel [x1] to output channel [x2].
[x1]$ Switches off output channel [x1].
[x1] V[x2] Transfers the video signals from input channel [x1] to output channel [x2].
[x1] V[x2],[x3],[x4] Transfers the video signals from input channel [x1] to output channels [x2], [x3] and [x4].
[x1] A[x2] Transfers the audio signals from input channel [x1] to output channel [x2].
[x1] A[x2],[x3],[x4] Transfers the audio signals from input channel [x1] to output channels [x2], [x3] and [x4].
[x1] B[x2] Transfers both video and audio signals from input channel [x1] to output channel [x2].
[x1] B[x2],[x3],[x4] Transfers both video and audio signals from input channel [x1] to output channels [x2], [x3] and [x4].
[x1]P[x2] Transfers signals from input channel [x1] to all output channels in group [x2].
[x1]PP[x2],[x3],[x4] Groups output channels [x2], [x3] and [x4] under group [x1].
S[x]. Acquires the output channels in group[x].
Status[x1]. Acquires the input channel to the output channel [x1].
Status. Acquires the input channel to the output channels one by one.
Save[Y]. Saves the present operation to the preset command [Y].[Y] ranges from 0 to 9.
Recall[Y]. Recalls the preset command [Y].
Clear[Y]. Clears the preset command [Y].
[X1]*[X2]! Transfers both video and audio signals from input channel [x1] to output channel [x2].
AVSW-DVI8x8