Filter
Top Products
11
CHAPTER 4: Operation
4.1 LED Indicators
Power On (PWR) LED:
Link Status (LINK) LEDs:
NOTE
When the rear port is physically uplinked (cabled) to another hub, the
LINK LED will normally be ON when the Up-Link switch is set to the
“
=
x
=” position. If you isolate the MiniHub for full-bandwidth local
operation by moving the Up-Link switch to the “===” position, the LINK
LED will be OFF because the up-link is logically disabled.
Receive Packets (RX) LEDs:
4.2 Operating Features
Partitioning and Reconnection:
4. Operation