Filter
Top Products
DVI-D CAT X KVM-EXTENDER
28
Appendix B: Rack Mount Options
DVI-D Cat X KVM- Extender units can be mounted in a 19” rack using the mounting kit:
DVI-D Cat X- Rackmount Kit. Two different versions are available – one each for
Singlehead and for Dualhead devices.
DVI-D Cat X- Rackmount Kit for Singlehead devices consists of:
Drei Blindplatten
M2,5x5 Philips type
countersunk screws (8x)
M2,5x2 spacer (8x)
Base plate
19” Rackmount Kit for Singlehead devices (ACS1009A-RMK)
DVI-D Cat X- Rackmount Kit for Singlehead devices consists of:
Drei Blindplatten
M2,5x5 Philips type
countersunk screws (8x)
M2,5x2 spacer (8x)
Base plate
19” Rackmount Kit for Dualhead devices (ACS2209A-RMK)
To mount a unit:
1. Align the holes on the base plate with the vacant screw holes on the base of the DVI-D
Cat X KVM- Extender unit.
2. Fasten the base of the unit to the plate of the mounting kit using the supplied screws.
Only use the supplied, short screws, to prevent damages on
the PCB’s
3. Close the remaining gaps with blanking plates.