APPENDIX B: RACK MOUNT OPTIONS
41
Appendix B: Rack Mount Options
DVI-D Cat X KVM- Extender units can be mounted in a 19” rack using the mounting kit:
DVI-D Cat X- Rackmount Kit. Two different versions are available – one each for
Singlehead and for Dualhead devices.
Mounting Instruction Rackmount-Kit ACS1009A-RMK
Using the Rackmount-Kit ACS1009A-RMK, up to 4 devices of the device size
103x143x29mm (Singlehead Devices) can be mounted into a 19“-Server Rack. The
Rackmount Kit requires 1U Rackspace. Blindplates (in the list of parts delivered) allow to
cover unused device positions.
Mounting instruction:
• Align the holes on the base plate with the vacant screw holes on the base of the device.
• Fasten the base of the unit to the plate of the mounting kit
Only use the supplied, short screws, to prevent damages on
the PCB’s
• Close the remaining gaps with blanking plates.
base plate
8 pieces spacer – M2,5x2
8 pieces M2,5x5 Philips type
countersunk screws
3 pieces blind plate