Filter
Top Products
SERVSWITCH
BRAND CATX KVM EXTENDER FAMILY
32
3. Select the video channel you want to configure using one of the following keys on the
numeric keypad:
Channel Command Key
Select Channel 1 For Adjustment <1>
Select Channel 2 For Adjustment <2>
Select BOTH Video Channels <0> (Channel 0)
Use Channel 0 to tune both video channels simultaneously. This
simplifies the procedure for setting up large dual-head installations
where a consistent cable type is used and the adjustments required
should be almost the same.
4. Reset the selected channel(s) by pressing:
<Left Control> + <Home>
5. Step through the Assisted EQ settings to find the level that gives the best image.
Assisted EQ Command Key Sequence
Next Assisted EQ Setting <Left Control> + <PgUp>
Previous Assisted EQ Setting <Left Control> + <PgDn>
Assisted EQ steps through a table of preset LF & HF EQ values for
different lengths of cable (in 80ft {25m} increments calibrated from 0 to
1250ft {375m}). Each time you enter Command Mode and start adjusting
Assisted EQ, the unit resets LF and HF values.
After finding the best setting, you will probably want to fine-tune the LF and
HF equalization settings (see steps 8&9). This is best done after adjusting for
any color skew as described below.