![](http://pdfasset.owneriq.net/3/a3/3a3bf06e-1a8b-48cc-b573-9107054c15b3/3a3bf06e-1a8b-48cc-b573-9107054c15b3-bga.png)
9
CHAPTER 3: Installation
NOTE
Both ends of the T-
connector must be attached
to network cabling. If the
Adapter is at the end of a
network segment, the end of
the T-connector not attached
to the network must have a
50-ohm terminator installed.
3.2.3 LE075A
For the Modular Parallel Adapter for
AUI, refer to Fig. 3-4.
After connecting the connector,
press the slide latch to the left to
lock the connector into place.
Fig. 3-4. Connecting an AUI Cable to the Media Unit.
NOTE
For use with an external
power supply only. Not to be
used with the SPC!