Filter
Top Products
19
CHAPTER 4: Software Setup and Operation
4.5.2 C
ONFIGURATION
(O
PTIONAL
)
SETAILAN accepts the following
standard command line switches:
HELP, XEROX, IEEE, MPX,
PACKET_SIZE, REMOVE,
VERBOSE, “?” and “@.”
In addition to the standard
command line switches, SETAILAN
accepts the following: UNIDIR,
LPTn, EPP, and DISABLELINK
4.5.3 O
PERATION
To activate the Artisoft LANtastic
network software using the adapter,
use the batch file STARTNET.BAT
that the LANtastic installation
program built for you, or use the
following commands (with
appropriate options—see your
LANtastic user’s guide):
SHARE
SETAILAN [parameter 1]
[parameter 2]
AILANBIO
REDIR name
To use the PC as a server, enter the
following additional command:
SERVER
4.6 PACKET Driver
The Packet driver is based on and
conforms to the FTP Software public
domain specifications. This driver
can be used with the following
Network Operating Systems (NOS):
FTP Software PC/TCP, Wollongong
Pathway, NSCA Telnet, Intel
Netsight, and many other NOS
based on these specifications.
4.6.1 I
NSTALLATION
Refer to your NOS documentation
for instructions on how to install the
Packet driver.
The Packet driver
(SETPACKET.COM) may be
operated from the DOS prompt or
included in a batch file. In any case,
the Packet driver should be loaded
before the NOS files are activated.
4.6.2 C
ONFIGURATION
(O
PTIONAL
)
SETPACKET accepts the following
software-related command line
switches:
l xx — Software interrupt #xx,
where xx ranges between 60
to 80 (hexadecimal). Default
xx=60 hex.
?,H — Displays a summary of the
command line options.