Filter
Top Products
19
CHAPTER 3: Configuration
S2-1: Carrier Control Method
The setting for S2-1 determines whether the carrier
is “Constantly On” or “Controlled by RTS.” This
allows for operation in switched carrier, multipoint,
and/or hardware handshaking applications.
S2-1 Setting
On Controlled by RTS
Off Constantly On
NOTE
When in Controlled mode, RTS must go negative to turn
off the Transmitter and enable the Receiver.
S2-2: RTS/CTS Delay
The setting for switch S2-2 determines the amount of
delay between the time the Converter “sees” RTS and
when it sends CTS.
NOTE
The RTS/CTS Delay setting should be based upon
transmission timing.
S2-2 Setting
On 8 msec
Off No delay