Filter
Top Products
LH1350C Serial Fast Ethernet NICs
6
24-hour Technical Support: 1-724-746-5500
Troubleshooting
Diagnostics LEDs and Boot ROM
LEDS
The LINK/ACT LED lights when a fiber cable or twisted pair cable connection
is good. It blinks to indicate activity.
The collision and full-duplex LED report board operating status.
Boot ROM
To add the remote boot feature to a workstation, insert the Boot ROM into the
ROM socket. See Figure 1 on page 2.
After power UP, the LINK/ACT LED should light; if not, check the following:
1 Confirm that the LH1350C module is properly inserted into the master
slot.
2 Confirm that the PC is properly connected to a power source and with the
power source turned ON.
3 Check the fiber cable for proper connection.
4 Contact Tech Support: 1-724 746-5500 if those steps fail to produce the
desired result.
Note: To connect this device to a router, bridge, or switch, please refer to the
corresponding technical manual for the device.
Declaration of Conformity
Name of Mfg: Black Box Corp,1000 Park Dr., Lawrence, PA 15505 U.S.A.
Model: LH1350C-xx-R3, Network Interface Cards
Part Number: LH1350C-ST-R3, LH1350C-SC-R3
Regulation: EMC Directive 89/336/EEC
Purpose: To declare that the LH1350C-ST-R3 and LH1350C-SC-R3, to
which this declaration refers, is in conformity with the following
standards:
CISPR 22:1997+A1:2000; EN 55022:1998+A1:2000 Class A; FCC Part 15 Subpart B;
21CFR subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s)
and Standard(s).
July 5, 2005
Stephen Anderson, Vice-President of Engineering Date
7
24-hour Technical Support: 1-724-746-5500
Contact Us
Technical support
Technical support is available at techsupport@transition.com
• US and Canada: 1-724-746-5500 (24 hours)
Email
Ask a question anytime by sending an email: info@blackbox.com.
Address
Black Box Corporation
1000 Park Drive
Lawrence, PA 15055
Telephone: 724-746-5500
Fax: 724-746-0476