Black Box extended range dvi-d externderwith audio and rs-232 Network Hardware User Manual


 
724-746-5500 | blackbox.com
Page 8
Chapter 1: Specifications
1. Specifications
Audio Support — Stereo 2-channel analog audio
Approvals — Converter Unit: FCC, CE, RoHS, WEEE
Power Supply: UL
®
, FCC
Compliance — HDMI, DVI 1.1, HDCP
Computer Interface — DVI-D
ESD Protection — Human body model: ±19 kV (air-gap discharge) and ±12 kV
(contact discharge);
Core chipset: ±8 kV
Equalization — Automatic
Heat Dissipation — 3.41 BTU/hr.
Input DDC Signal — 5 volts p-p, TTL
Input TMDS Signal — 1.2 volts p-p
Input TMDS Signal — 1.2 volts p-p
Maximum Distance between TX and RX — 328 ft. (100 m) using
CAT5e/CAT6/CAT7 cable
Operating System Support — All known operating systems, all known
hardware that supports/follows the HDMI/DVI spec
Rackmount Kits — Wallmount brackets and hardware included
RS-232 Support — Transmitter: Acts as DCE device;
Receiver: Acts as DTE device;
RX and TX: additional control signals not supported
Video Bandwidth — 340 MHz (10.2 Gbps)
Video Support — 480p/720p/1080p60/1920x1200 @ 60 Hz/
1600 x 1200 @60 Hz
Connectors — Transmitter: (1) DVI F input, (1) 3.5-mm audio input, (1) 2.5-mm
barrel connector for power, (1) RJ-45 8P8C output, (1) RS-232 DB9 F for
serial extension;
Receiver: (1) DVI F output, (1) 3.5-mm audio output, (1) 2.5-mm barrel
connector for power, (1) RJ-45 8P8C input, (1) RS-232 DB9 M for serial
extension
Indicators — (2) LEDs on both the transmitter and receiver: Power, Link
Temperature Tolerance — Operating: 32 to 104° F (0 to 40° C)
Operating Humidity — 90%, noncondensing