Filter
Top Products
19
CHAPTER 4: Installation
4.2 Connection to the RS-232 Interface
NOTE
If you must use a cable to connect the Converter to the RS-232 device,
make sure it is a straight-through cable of the shortest possible length.
We recommend no more than 6 ft. (1.8 m).
4.3 Wiring for Multipoint Applications
NOTE
Connections are to screw terminals directly on the Converter.
XMT A
XMT B
RCV B
RCV A
XMT A XMT A
RCV B RCV BRCV BRCV BRCV A RCV A RCV A RCV A
XMT A XMT AXMT B XMT BXMT BXMT B
MASTER SLAVE 1 SLAVE 2 SLAVE 3 SLAVE N