Filter
Top Products
Black Box LH1500 Media Converters Installation and User Guide (08/05)
33
3.3 Connecting Ethernet Media
Connecting Ethernet media to the Black Box LH1500 Media Converter is very
simple and straightforward. Using a properly terminated media segment, simply attach
the cable end to the appropriate connector.
See Sections 4.2 and 4.3 for a description of the LEDs.
3.3.1 Connecting Twisted Pair (RJ-45, Unshielded or Shielded)
The following procedure describes how to connect a 100BASE-TX twisted pair
segment to the RJ-45 port on the Black Box LH1500 Media Converters. The procedure
is the same for both unshielded and shielded twisted pair segments.
1. Using standard 100BASE-TX media, insert either end of the cable with an RJ-45
plug into the RJ-45 connector of the Black Box LH1500 Media Converter.
2. Connect the other end of the cable to the corresponding device.