Filter
Top Products
Page 5
724-746-5500 | blackbox.com
5.8-GHz 300-Mbps Wireless Ethernet Kit Quick Start Guide
Troubleshooting
Power:
• Check that the PoE cabling matches the illustration.
• Check the network connection on your switch and verify that all RJ-45 cables
are plugged in properly.
• Only use the PoE injector supplied.
• Make sure the 110-VAC power source is providing clean and consistent AC
power to the 18-VDC power supply.
Signal Quality:
• Ensure line of sight (LOS).
• Check the signal strength in the Web interface (-20 dB is excellent strength and
-80 dB is weak).
Web Interface:
• Refer to the user manual for detailed setup information.
• Plug the RJ-45 male side of PoE directly into the computer and verify network
status shows “connected.”
• Verify that the local computer’s network settings are in the same IP subnet
range as the radio (for example, if the radio’s IP address is 192.168.88.10, then
the computer’s IP address should be 192.168.88.200).
To download the user manual, go to ftp://ftp.blackbox.com/manuals/L/
LWE200A_user.pdf, or visit the Black Box Web site (blackbox.com) and enter
LWE200A in the search bar.