Filter
Top Products
28
5250 ADAPTER CARDS: HARDWARE INSTALLATION MANUAL
SYSTEM.INI file. The entry can also be added by using any text editor and adding
the following line to the [386Enh] section:
Device=CEM5250.386
Once installed, the CEM5250.386 VxD will be loaded from the Windows startup
files. The system must be rebooted in order for this change to take effect. Do not
use this file on Windows 95/98 systems.
5.5.3 T
WINAX
OEM.
SYS
There is a Windows NT
®
device driver called TwinaxOEM.sys located in the install
directory (default, C:\5250CARD). At system boot time, this driver will
automatically reserve resources for the Adapter. This driver is also compatible with
applications such as Client Access 95/NT Mod 3 and NetSoft/NetManage Router
for AS/400 Version 3.10. Do not use this file on Windows 3.1 or 95/98 systems.
5.6 5250 Windows Diagnostics
The Windows utility diskette contains a Windows 95/98 and Windows 3.1
diagnostic program for the Adapter Card. For Windows NT
®
3.51 and NT 4.0 you
will need to create a DOS bootable floppy on a DOS or Windows 95/98 system and
then use the “Make Diagnostic Diskette” icon to copy the DOS diagnostic
programs to the DOS bootable floppy. Then reboot from this floppy and follow the
instructions in Section 5.7.
5.6.1 16 B
IT
W
INDOWS
D
IAGNOSTICS
By default, a 16-bit diagnostics program (diag5250.exe) is installed when the 5250
card software is installed on a Windows 3.x machine. A Windows 95/98 machine
can also use this program by running it manually from the 5250 Card directory.