Filter
Top Products
1
Enable multiple
workstations to share a
single PS/2 compatible
processor.
Or set them up so a
single workstation
has access to more
than one processor.
For your PS/2 style
keyboard with VGA
video.
Perfect for sharing
images between
multiple users.
Rugged design with a
lifetime guarantee.
Include a reboot button
to unlock a frozen
keyboard.
Choose from desktop
and rackmount chassis
versions.
W
ith the BLACK BOX
®
PS/2
Style Keyboard Switches
with VGA, two (or more) different
keyboard video/display stations
can economically share one IBM
®
PS/2
®
compatible processor, or
two (or more) such processors
can be accessed by a single
keyboard/video display station.
They’re perfect for small
training seminars in a classroom-
type setting where you require
fast and efficient switching of
keyboards and display stations
between common PS/2
compatible processors. You can
save money by sharing a common
processor—money that can be
used elsewhere in your network.
Reset a keyboard without
rebooting
Before the development of
our PS/2 Style Keyboard Switches
with VGA, when two PS/2
compatible PCs were connected
to a common keyboard, switching
A B
Save money by sharing a PS/2 processor.
Key Features
PS/2 STYLE KEYBOARD SWITCHES WITH VGA
between them was both tricky
and uncertain. The momentary
break in the keyboard power
connections often caused the
keyboard to “freeze.” This meant
that the system had to be
rebooted after switching.
Not so with these switches.
They enable you to reset the
keyboard through a reinitialization
cycle so that the processor is
able to accept new input data. To
generate the reinitialization, just
press and hold a front-panel
pushbutton for several seconds.
This lets you unlock a frozen
keyboard without rebooting,
saving you time (because you
won’t waste time rebooting the
computer after each switch
process) and money (because
you don’t have to buy extra
keyboards and monitors).
Applications with two
keyboard/video display stations
typically do not require the reset
Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: info@blackbox.com
© 2003. All rights reserved.
Black Box Corporation.
11/17/2003 #14931
switch to be used—it’s usually
required only when switching
two different PS/2 compatible
processors between a single
keyboard and monitor.
Durable and easy to set up
The switches are built to last,
too. Thanks to a sturdy design,
the units can be moved from one
location to another—in the office
or on the road. In fact, we’re so
certain of their durability, we
include a lifetime guarantee at
no additional charge.
What’s more, the PS/2 Style
Keyboard Switches with VGA are
easy to install and operate with
no frustration over plugging and
unplugging bundles of tangled
cable. Just insert the common
component plug into the rear-
panel socket marked “C” and the
components to be switched into
the sockets that correspond to
front-panel selector-knob
positions.
Our desktop 2-to-1 version
(the SW779A-R2) even includes
cables!
NOTE: These switches can be used with most types of PS/2 compatible
processors. Avoid connecting them to actual IBM PS/2 CPUs, or to CPUs
that are running OS/2
®
or other operating systems that must establish
contact with the keyboard at bootup time. For more compatibility
information, contact Technical Support.