Filter
Top Products
Compliance: Wizard, Wizard LP,
Wizard PRO: CE (EN55022
Class B), FCC Part 15
Subpart B Class A, IC Class/
classe A;
Wizard MP, Wizard DVI:
CE (EN55022 Class A),
FCC Part 15 Subpart B Class A,
IC Class/classe A
Distance (Maximum):
All models except Wizard DVI:
2 m (6.5 ft.) if interface-
powered or 10 m (32.8 ft.) if
AC-powered to any attached
keyboard, monitor, and
mouse;
Wizard, Wizard PRO, Wizard MP:
5 m (16.4 ft.) if interface-
powered or 30 m (98.4 ft.) if
AC-powered to any attached
CPU or cascaded KVM switch;
Wizard LP: 10 m (32.8 ft.) if
interface-powered or 30 m
(98.4 ft.) if AC-powered to any
attached CPU or cascaded
KVM switch;
Wizard DVI: 5 m (16.4 ft.) to any
attached CPU or cascaded
KVM switch
Resolution: All: Up to 1600 x 1280
noninterlaced at up to 100 Hz;
Wizard DVI: With video cards
and monitors that support
composite images transmitted
on multiple heads, the
KV1022A and KV1024A can
support up to 2400 x 1600 and
the KV1042A and KV1044A can
support up to 3200 x 2400
RS-232 Characteristics of OPTIONS
Port (Wizard, Wizard PRO, Wizard
MP, Wizard DVI):
Protocol: Asynchronous;
Data format: 8 data bits, no parity,
1 stop bit;
Data rate: 1200 bps;
Flow control: None
Standards: Wizard, Wizard LP,
Wizard PRO, Wizard MP:
VGA, SVGA, XGA, XGA-2,
SXGA, or UXGA video;
Wizard MP: Also supports VESA
DDC, DDC1 and DDC2
signaling;
Wizard DVI: DDC2B signaling
Interface:
Wizard, Wizard LP, Wizard PRO:
Video: VGA;
Keyboard and mouse:
IBM PS/2 compatible;
with appropriate adapters,
also supports IBM PC/AT
®
keyboards, CPUs with
PC/AT keyboard ports, and
CPUs with TIA/EIA RS-232
mouse ports;
OPTIONS port (Wizard,
Wizard PRO): TIA/EIA
RS-232 proprietarily pinned
on DB15;
Wizard MP:
Video: VGA;
Keyboard and mouse:
Both models: IBM PS/2 or
Sun compatible; with
appropriate adapters,
also supports IBM
PC/AT keyboards,
CPUs with PC/AT
keyboard ports, and
CPUs with TIA/EIA
RS-232 mouse ports
KV805A only: USB;
Audio: 3.5-mm stereo;
OPTIONS port: TIA/EIA RS-232
proprietarily pinned on
DB15;
Wizard DVI:
Video: Digital Video Interface;
Keyboard and mouse:
IBM PS/2 or compatible;
with appropriate adapters,
also supports CPUs with
TIA/EIA RS-232 mouse
ports;
OPTIONS port: TIA/EIA RS-232
proprietarily pinned on
DB15
User Controls:
All models:
Keyboard commands;
mouse-click functions;
Wizard, Wizard PRO, Wizard MP,
Wizard DVI: (1) front-mounted
pushbutton for channel
change and configuration
mode;
Wizard LP:
(1) top-mounted pushbutton
for channel change and
maintenance mode;
Wizard, Wizard MP only:
(1) bottom-mounted 8-position
DIP switch for reset and
firmware upgrade;
Wizard
PRO
only: On-screen
menu;
Wizard DVI only: (1) bottom-
mounted 8-position DIP switch
for bootup autoswitching,
reset, and firmware upgrade;
optional Remote Control
Module for channel change;
optional serial commands for
channel change and
multichassis synchronization
Connectors:
Wizard, Wizard PRO, Wizard MP,
Wizard DVI: (1) rear-mounted
barrel jack for optional power-
supply connection;
(1) multipurpose DB15 F;
Wizard LP: (1) side-mounted
barrel jack for optional power-
supply connection;
Wizard, Wizard PRO, Wizard LP:
User port:
(1) HD15 F for monitor
attachment;
(2) 6-pin mini-DIN F for
keyboard and mouse
attachment;
CPU ports ([2] on SW641A,
SW651A; [4] on SW642A,
SW644A, SW652A; [8] on
SW648A), each consisting of:
(1) HD15 F for video port
attachment;
(2) 6-pin mini-DIN F for
keyboard port and
mouse port attachment;
Wizard MP:
User port:
(1) HD15 F for monitor
attachment;
(1) 8-pin mini-DIN F for Sun
keyboard and mouse
attachment;
(2) 6-pin mini-DIN F for PS/2
keyboard and mouse
attachment;
(2) 3.5-mm stereo audio
jacks: (1) for microphone
attachment, (1) for
speaker or headphone
attachment;
CPU ports: (4) DB25 F
composite;
Wizard DVI:
User port:
(2) 6-pin mini-DIN F for
keyboard and mouse
attachment;
Molex DVI-D F for monitor
attachment: ([1] on
KV1002A, KV1004A; [2]
on KV1022A, KV1024A;
[4] on KV1042A,
KV1044A);
CPU ports ([2] on KV10x2A
models; [4] on KV10x4A
models), each consisting of:
(2) 6-pin mini-DIN F for
keyboard and mouse
attachment;
Molex DVI-D F for video
port attachment: ([1] on
KV1002A, KV1004A;
[2] on KV1022A,
KV1024A; [4] on
KV1042A, KV1044A)
Indicators:
Wizard, Wizard PRO, Wizard MP,
Wizard DVI: (1) front-mounted
7-segment status display;
Wizard LP: All top-mounted:
(1) Power LED;
SW641A: (2) Port (Channel)
LEDs;
SW642A: (4) Port (Channel)
LEDs
Enclosure:
Wizard, Wizard MP, Wizard DVI:
Steel, aluminum, and plastic;
Wizard LP, Wizard PRO: Steel
and aluminum
Temperature Tolerance: 32 to 104°F
(0 to 40°C)
Humidity Tolerance: 5 to 60%,
noncondensing
Altitude (Maximum): 10,000 ft.
(3048 m)
Power:
All models except Dual- and
Quad-Head Wizard DVI:
• 5 VDC at up to 500 mA from
the keyboard interfaces of
the attached computers, or
• From the optional power
supply PS649 (not included):
100–240 VAC, 50–60 Hz from
power outlet, through
detachable power cord and
IEC 320 M inlet, to external
transformer;
Dual- and Quad-Head Wizard
DVI only: From power supply
PS649 (not included): 100–
240 VAC, 50–60 Hz from power
outlet, through detachable
power cord and IEC 320 M
inlet, to external transformer
Size:
Wizard, Wizard MP, Wizard DVI:
1.75"H (1U) x 10.3"W x 5.9"D
(4.4 x 26.2 x 15 cm);
Wizard LP: 1.1"H x 6.6"W x 4.8"D
(2.8 x 16.8 x 12.2 cm);
Wizard PRO: 1.75"H (1U) x
17.1"W x 8.1"D (4.4 x 43.4 x
20.6 cm); connectors protrude
an additional 0.2" (0.5 cm) from
the rear of the unit, for a total
depth of 8.3" (21.1 cm)
Weight:
Wizard, Wizard MP, Wizard DVI:
2.2 lb. (1 kg);
Wizard LP: 1 lb. (0.5 kg);
Wizard PRO: 3.2 lb. (1.5 kg)
Specifications
5