Filter
Top Products
- 4 -
Install the device
Note: Make sure the procedures in “Install the
Driver & Utility” has been performed.
1. If you are using the Wireless PCI Card, before
installing the device, make sure the computer
is turned off. Remove the expansion slot
cover from the computer. For Wireless
CardBus users, please locate your CardBus
slot.
2. Carefully slide the Wireless PCI/CardBus
Card into the PCI/CardBus slot. Push evenly
and slowly and ensure it is properly seated.
For Wireless PCI Card, you may have to use
the mounting screw to have the card screwed
securely in place.
3. After the device has been connected to your
computer, turn on your computer. Windows
will detect the new hardware and then
automatically copy all of the files needed for
networking. Recover your expansion slot
cover if you are using the Wireless PCI Card.
Note for Windows 98 users:
Before installation of the device, make sure you
have your operating system CD-ROM at hand.
You may be asked to insert the OS CD-ROM in
order to download specific drivers.