Filter
Top Products
2121
2121
21
Driver Installation
The New Hardware Found Dialog Box
•
New Hardware Found New Hardware Found
New Hardware Found New Hardware Found
New Hardware Found dialog box. Here, you are asked
what driver files are associated with the new hardware. Do
the following:
1. From the choices given, select
Driver from disk providedDriver from disk provided
Driver from disk providedDriver from disk provided
Driver from disk provided
by hardware manufacturerby hardware manufacturer
by hardware manufacturerby hardware manufacturer
by hardware manufacturer.
2. Windows 95 then displays the
Install from DiskInstall from Disk
Install from DiskInstall from Disk
Install from Disk dialog
box. Here, you are asked for the location of the driver files.
3. Insert the diskette and type the path for the location of the
drivers (usually A:\). If ‘A:’ is not the correct drive letter,
substitute the correct letter.
4. New Hardware Found is displayed repeatedly for each
logical device. Depending on the card you are installing,
these can include:
• ECP Printer Port A and B
• High-Speed Communications port A and B
• Boca I/O Adapter (this is the controller device for the
card; double-click to change ports, speed)
• Parallel Port Controller
• Serial Port Controller
5. Continue as instructed to complete Windows 95
configuration and see page 22.
9361.p65 2/11/99, 11:02 AM21