Filter
Top Products
Client software, Operator Client software, Video
Streaming Gateway software, Mobile Video
Services software) in all supported languages
– Configuration Manual (PDF format) in all
supported languages (except Arabic)
– Operator’s Manual (PDF format) in all supported
languages (except Arabic)
• Quick Start Manual in English, French, German,
Simplified Chinese and Spanish
Licenses are provided as eLicenses via email.
Technical specifications
System Specifications
Maximum number of workstations
simultaneously viewing the same
camera
Multicast: 50
Unicast: 5
Supported GUI languages English, German, Dutch, Italian,
Portuguese, French, Spanish,
Simplified Chinese, Traditional
Chinese, Russian, Hungarian,
Japanese, Czech, Danish,
Finnish, Greek, Norwegian,
Polish, Swedish, Thai, Turkish,
Korean, and Arabic
Anti-Virus software must not perform a full-scan. Performance may
decrease depending on configuration.
Event reaction time <1 second, assuming sufficient
network bandwidth
Alarm reaction time (incl. 1 live
Image pane, 1 instant playback
Image pane and 1 map Image
pane):
Maximum 2 seconds, assuming
sufficient network bandwidth
Bandwidth requirements for LAN Min. 1 Gbps for connections
between:
Operator Client to Management
Server
Operator Client to VRM/DiBos
Management Server to
NVR/VRM/DiBos
Bandwidth requirements for
remote access
>= 300kbps
Hardware transcoder Hardware transcoder VIP-XTCXF-
INT or VJT-XTCXF must be
configured in VRM, refer to VRM
documentation.
Hardware transcoding only
applicable for VRM connected
BVIP cameras.
For transcoding live streams it is
not required that the respective
camera is recording.
Required open ports
Connection to VRM LAN: port 1756
WAN: port 80 or port 443 as per
default
Connection to
Video Streaming Gateway
TCP port 8756 (VSG instance 1)
TCP port 8757 (VSG instance 2)
TCP port 8758 (VSG instance 3)
TCP port 8759 (VSG instance 4)
TCP port 8760 (VSG instance 5)
TCP port 8761 (VSG instance 6)
TCP port 8762 (VSG instance 7)
Connection to (Enterprise)
Management Server
TCP ports 5390, 5392, 5393,
5395
Connection to Operator Client
Workstations by Bosch VMS SDK
TCP port (default 5394)
Connection from Management
Server to SMTP (for email
notifications)
TCP port 25
Connection to Bosch encoders
and decoders
Control channel: TCP ports 80
and 1756 (port 443 for encoders
using https)
Network scan: UDP ports 1757
and 1758
Multicast detection: one
selectable UDP port (default
1800)
Multicast video transmission: For
each encoder audio or video
stream, 1 selectable UDP port
Unicast UDP transmission: UDP
ports dynamically assigned in the
range from 1024 to 65000
Connection between Management
Server and DiBos (as of V.8.10,
earlier versions need a patch for
using Web service)
TCP port 808
Connection between Operator
Client and DiBos DVRs (uses
DCOM)
TCP Port 135 plus four TCP ports
and four UDP ports dynamically
assigned in the range from 1025
to 65535
These ports are also used when
Management Server and an old
DiBos 8.9 or earlier without patch
are connected.
Management Server Specifications
Maximum number of sustained
events
For highest performance server:
500 events/s with Logbook
1000 events/s without Logbook
5000 events/s at peaks with
Logbook
Logbook Supported by SQL Server 2008
R2 (64-bit version)
4 GByte Logbook size
Management Server Redundancy Available with VMware HA.
Please contact Bosch Design
Engineer for redundancy
solutions.
Maximum number of Task
Schedules
200
4 | Bosch Video Management System v.4.5.5