Bosch Appliances VDx-244 Webcam User Manual


 
WDR Analog Camera Menus Setup menu | en 1
1Setup menu
Press straight down on the button of the control pad to access the SETUP
menu.
Move the button up or down to move the cursor through the menus.
Move the button to the right or left to change values.
When the symbol is shown, press straight down on the button to
select an item or open a submenu.
Navigation items at the bottom of the screen
To move to the continuation of a menu, select NEXT.
To return to the previous menu, select BACK or RETURN.
To save changes, select SAVE ALL.
To close the SETUP menu, select EXIT.
1.1 Main menu
Menu
Set
LENS
WHITE BAL
WDR
DNR
DAY/NIGHT
IMAGE ADJUST
GENERAL
WDR Analog Camera Menus Setup menu | en 2
1.1.1 Lens menu
DSS (Digital Slow Shutter) increases the amount of light captured by
the factor selected. Use only in scenes with little movement.
LENS DC BRIGHTNESS 0~255
AGC 0~20
FLICKERLESS ON, OFF
DSS OFF, X2, X4, X6, X32, X64,
128X, X256, X512,
SHUTTER 1/60, 1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000,1/
10000 (NTSC)
1/50, 1/100, 1/250, 1/500,
1/1000, 1/2000, 1/4000,
1/10000 (PAL)
RETURN
ESC BRIGHTNESS 0~255
AGC 0~20
FLICKERLESS ON, OFF
DSS OFF, X2, X4, X6, X32, X64,
128X, X256, X512,
RETURN
WDR Analog Camera Menus Setup menu | en 3
1.1.2 White balance menu
ATW (Auto Tracking White balance: 2,500 K to 8,500 K) and PUSH (Full
pull-in: 1,800 K to 10,500 K) continuously analyze color temperature.
Use ANTI CR (Anti Color Rolling) when certain types of fluorescent light
cause the picture to periodically change color.
Use PUSH LOCK with a reference white object filling the screen.
WHTE BAL ATW ENVIRONMENT INDOOR, OUTDOOR
RETURN
PUSH
USER1,
USER2
R-GAIN 0~255
B-GAIN 0~255
RETURN
ANTI CR ENVIRONMENT INDOOR, OUTDOOR
MANUAL B-GAIN UP
B-GAIN DOWN
PRESET
RETURN
PUSH
LOCK
WDR Analog Camera Menus Setup menu | en 4
1.1.3 Wide dynamic range menu
WDR (Wide Dynamic Range) is a dual shutter exposure correction
function for high contrast scenes to obtain images with fewer blown-
out highlights and hidden shadows.
Use BLC (Back Light Compensation) to see a dark object in front of a
bright background.
Use HLC (High Light Compensation) to darken highlights and avoid
image wash-out (for example, car headlights).
WDR WDR MODE WDR, DWDR
BRIGHTNESS 0~255
CONTRAST LOW, MID-LOW, MID, MID-
HIGH, HIGH
RETURN
BLC AREA AUTO, MANUAL
RETURN
HLC CLIP LEVEL 0~255
SCALE 0~15
RETURN
WDR Analog Camera Menus Setup menu | en 5
1.1.4 Digital noise reduction menu
DNR (Digital Noise Reduction): In low ambient lighting conditions use
2DNR to reduce noise in still images; use 3DNR to reduce noise in
scenes with movement.
1.1.5 Day/night menu
DNR 2DNR LEVEL LOW, MID, HIGH
RETURN
3DNR LEVEL AUTO, LOW, MID, HIGH
RETURN
OFF
DAY/NIGHT AUTO DELAY CNT 0~15 SEC
D/N LEVEL LOW, MID, HIGH
RETURN
COLOR
B/W BURST ON, OFF
RETURN
WDR Analog Camera Menus Setup menu | en 6
1.1.6 Image adjust menu
DIS (Digital Image Stabilizer) electronically suppresses camera shake.
IMAGE
ADJUST
IMAGE SHARPNESS 0~15
GAMMA 0.38, 0.42, 0.45, 0.50,
0.55, 0.63, 0.71, 0.83
HR MODE OFF, X1, X2, X3, X4, X5, X6,
X7
CONTRAST 0~63
RETURN
D-EFFECT DIS ON, OFF
D-ZOOM OFF, X2, X3, X4, X6, X8,
X16
MIRROR V-FFLIP, H-FLIP, HV-FLIP
FREEZE ON/OFF
NEGA/POSI NEGA/POSI
RETURN
COLOR-
GAIN
R-GAIN 0~63
B-GAIN 0~63
RETURN
WDR Analog Camera Menus Setup menu | en 7
Image adjust menu - continued
Area selection for motion or privacy masks
Select area 1, 2, 3 or 4.
Top: extend or reduce upper limit of detection area.
Bottom: extend or reduce bottom limit of detection area.
Left: extend or reduce left limit of detection area.
Right: extend or reduce right limit of detection area.
MOTION AREA 1/4, 2/4, 3/4, 4/4
DISPLAY ON, OFF
DETECT AREA
SENSITIVY 0~15
TOP 0~15
BOTTOM 1~16
LEFT 0~23
RIGHT 1~24
RETURN
PRIVACY AREA 1/15~15/15
DISPLAY ON, OFF
POSITION
COLOR GREEN, BLUE, YELLOW,
CYAN, MAGENTA, WHITE,
BLACK, RED
TRANSP 0.00, 0.50, 0.75, 1.00
MOSAIC ON, OFF
RETURN
RETURN
1
LEFT RIGHT
TOP
RIGHT
BOTTOM
1
reduce extend
WDR Analog Camera Menus Setup menu | en 8
1.1.7 General menu
When the camera title is ON, a virtual keyboard appears on the screen. Use
the control pad to move to the character you want and select it. Repeat this
to enter the camera ID you desire. You can enter up to 52 characters.
GENERAL CAM TITLE OFF
ON
RETURN
LANGUAGE ENGLISH, JAPANESE, GERMAN, FRENCH,
RUSSIAN, PORTUGUESE, SPANISH,
SIMPLIFIED CHINESE
SYNC INT
L/L
SHIFT UP
SHIFT DOWN
PRESET
RETURN
VERSION
FACTORY
RESET
RETURN
ABCDEFGHIJKLMNOPQRSTU
V
WXYZ()–./0123456789
DEL EXIT