Boston Acoustics PV350 Switch User Manual


 
3
C o n n e c t i o n s
Line level: Use the jack labeled “line level in” with most systems. These inputs accept the line level signal from your
receiver’s subwoofer output. The subwoofers circuitry filters out the high frequencies and sends the remaining low fre-
quencies to the subwoofer power amplifier.
Speaker level: Use these high-level terminals with receivers that do not have a subwoofer output. The speaker inputs
accept both left and right channel speaker signals from your receiver.
D e s c r i p t i o n
Boston’s PV350 subwoofer delivers the dynamic bass foundation that is essential for lifelike reproduction of movie
soundtracks and music in the home. This attractive, powered subwoofer will complement any stereo or home theater
surround sound system with its impressive bass output and compact size.
This subwoofer utilizes our rugged DCD™ (Deep Channel Design) bass unit designed in Boston’s state-of-the-art engi-
neering facility in Peabody, Massachusetts. Every one is tested as it comes off the line to be within ±1dB of the lab refer-
ence unit, an incredibly tight tolerance. The amplifier has a built-in variable crossover that makes it easy to achieve a
seamless blend with the front/main speakers, while a 24dB/octave low-pass filter prevents the subwoofer from being
easily localized by ear, increasing placement flexibility. A crossover bypass function is provided for use with home theater
electronics that perform their own bass management.
Because of its strong amplifier and computer-optimized tuning, the PV350 is capable of impressive deep bass and high
output from a remarkably compact enclosure. In addition, it features BassTrac
®
, a proprietary Boston-designed circuit
that tracks the input signal to the subwoofer and prevents its amplifier from being driven into audible distortion. The
benefit: The bass stays clean and strong at almost any listening level.
S p e c i f i c a t i o n s
Frequency Response (±3dB) 45Hz–200Hz
Subwoofer Amplifier Power
FTC Rated Power: 50 watts @ 50 Hz into 4 ohms at less than 1% THD+N
Subwoofer Crossover 75Hz–200Hz
24dB/octave low-pass
Crossover Bypass Yes
Bass Unit 8" (203mm) DCD
down-firing
Enclosure Type Ported
Dimensions (HxWxD) 13 x 11
1
/4
x 15
1
/2
"
(with feet and rear connectors) (330.5 x 287 x 393mm)
Weight 18 lbs (8.1kg)