Filter
Top Products
10
Setting up the Projector
Do you want to control the computer’s mouse from the projector’s
remote or keypad?
NOTE: The USB mouse is
supported for use with
Windows 98, Windows 2000, and
Apple OS 8.5 and higher only.
1
Plug the USB cable into the USB mouse connector on your
computer. If your computer has a PS/2 mouse connector and
not a USB mouse connector, you can purchase the optional
CablePro III which has a PS/2 mouse connector or the Execu-
tive Remote IR Receiver. See “Optional Accessories” on
page 43.
Do you want to play your computer’s audio on the projector?
1
Plug either end of the audio cable into the audio connector on
your computer.
NOTE: You do not need to restart
your computer after connecting a
USB mouse to use it (it is hot-
pluggable).
2
Plug the other end of the audio cable into the connector
on the projector.
Now you’re ready to power up the projector and your laptop.
Skip to “Powering up the Projector and Adjusting the Image” on
page 13.