BOXLIGHT CP-11t Projector User Manual


 
36
APPENDIX
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
Remote Control Unit
does not work.
Check the batteries.
Check the ALL-OFF switch on the Remote Control Unit is set to ON..
Make sure nothing is between the Remote Receiver and the Remote Control Unit.
Make sure you are not too far from the projector when using the Remote Control Unit.
Maximum operating range is 16.4 (5m).
Problem: Try these Solution
Wireless Mouse
function does not
work.
Check the cable connection between the projector and the computer.
Check the mouse setting on your computer.
Turn the projector on before you turn on the computer.
Boxlight Service is easily obtained. If after following instructions above, you find that service is necessary,
contact Boxlight for assistance at 1-800-762-5757 or 360-779-7901.
Give the model number and explain the difficulty. We will advise you how to obtain service.
Please have the following information available.
Serial No. of projector.
Resolution of the computer.
Refresh rate of computer.