BOXLIGHT MP-86i Projector User Manual


 
23
Connection to the RGB signal terminal (continued)
Some computers may have multiple display screen modes. Use of some of these modes will
not be possible with this projector.
•Be sure to check jack type, signal level, timing and resolution before connecting this
projector to a computer.
•Depending on the input signal, full-size display may not be possible in some cases.
Caution
3. Example of computer signal
Note 1: Mac adapter is necessary to the resolution mode.
Projector is compatible with 13 inch mode and 16 inch mode.
Mac 13" mode=switch 1 and switch 2 are ON.
Mac 16" mode=switch 2 and switch 4 are ON.
123456
ON
OFF
(Example 16 inch mode)
Resolution fH fV
Rating Signal mode Display mode Note 1
H × V (kHz) (Hz)
640 × 400 24.8 56.4 NEC PC9800 Zoom in
640 × 350 37.9 85.1 VESA VGA-1 Zoom in
640 × 400 37.9 85.1 VESA VGA-2 Zoom in
720 × 400 37.9 85.0 VESA TEXT Zoom in
640 × 480 31.5 59.9 VESA VGA-3 Zoom in
640 × 480 35.0 66.7 Mac13"mode Zoom in
640 × 480 37.9 72.8 VESA VGA-3(72Hz) Zoom in
640 × 480 37.5 75.0 VESA VGA-3(75Hz) Zoom in
640 × 480 43.3 85.0 VESA VGA-3(85Hz) Zoom in
800 × 600 35.2 56.3 VESA SVGA(56Hz)
800 × 600 37.9 60.3 VESA SVGA(60Hz)
800 × 600 48.1 72.2 VESA SVGA(72Hz)
800 × 600 46.9 75.0 VESA SVGA(75Hz)
800 × 600 53.7 85.1 VESA SVGA(85Hz)
832 × 624 49.7 74.5 Mac16"mode Zoom out
1024 × 768 48.4 60.0 VESA XGA(60Hz) Zoom out
1024 × 768 56.5 70.1 VESA XGA(70Hz) Zoom out
1024 × 768 60.0 75.0 VESA XGA(75Hz) Zoom out
SW 1 ON
SW 2 ON
SW 2 ON
SW 4 ON