Filter
Top Products
4
Reduction/Enlargement button. Reduces and enlarges
copies to either 70% or 140%.
Resolution button. Allows you to choose text or photo
resolution for copies.
Contrast button. Adjusts the contrast of documents to be
copied.
Copy button. Press to start copying a document.
Error light. Indicates a problem when sending or receiving
a fax.
Stop button. Stops the current operation. Returns the fax
machine to standby. To stop recording or playing.
Monitor button. Press to get dialling tone.
Start button. Press to send a fax. Confirms an option
chosen from the menu. During a call, press to receive a fax.
To start recording or playing. To confirm the selection of
the menus for setting up the TAD submenus, parameters
and settings, and to switch to the next condition.
Function button. Function button lets you select options
from the menus. To provide access to the TAD
configuration menu. To select submenus.
RX Mode/Hold button. Selects reception methods for
faxes. When on a phone call, press to put a caller on hold.
They hear a beep.
Resolution/Volume – button. Adjust the resolution of
documents to be faxed. Select next option from a menu.
Decrease loudspeaker volume
Contrast/Volume + button. Adjust the contrast of
documents to be faxed. Select previous option from a
menu. Increase loudspeaker volume
Recall button. For use with switchboards and BT Select
Services.
Speed Dial/Clear button. Used to speed dial a stored
number. Deletes incorrect settings and characters.
Last Number/Pause button. Press once to display last
number dialled. If you have a document in the document
feeder it shows the last fax number, if not it shows the last
telephone number called. Press again to dial the number
displayed. When dialling or storing a number, press to
enter a pause.
External button. Connects you to an outside line when
connected to a switchboard.
Press to start playing new messages and memos. Press
during playback to pause and press again to resume
playing.
To start recording personal memos.
Also to move, while playing messages and memos, to the
start of the next message or memo.
To return, while playing messages and memos, to the
previous message or memo.
Delete. To delete messages and memos that have already
been played.
Message light. On, to indicate that there are messages or
memos have already been played.
Blinking
, to indicate that there are new messages or
memos.
Off
, to indicate that there are no messages or memos.
NOTE:
The control panel
is protected by
a plastic film.
Remove by carefully
peeling from
the corner.
PaperJet 60e_se 6-06-2003 16:46 Pagina 4