Filter
Top Products
Network OS Documentation Update 15
53-1002606-06
radius-server
2
Description Use this command to configure attributes on the RADIUS server. If the RADIUS server doesn’t exist,
it is added. If the RADIUS server already exists, then the attributes are changed.
Usage
Guidelines
Using the no form of the radius-server command sets the default values of the individual attributes.
Examples Example of adding a RADIUS server:
switch(config)# radius-server host 10.24.65.6 protocol chap retransmit 100
switch(config-radius-server-10.24.65.6)#
switch(config)# radius-server host 10.38.37.180 protocol pap
key “new#virgo*secret timeout 10
See Also None