Brocade Communications Systems 5100 Switch User Manual


 
36 EZSwitchSetup Administrator’s Guide
53-1002157-01
Managing devices
3
Reboot or power cycle the switch
When the switch is rebooted, the newly licensed ports come up as enabled.
Use the Advanced Management tool
See “Accessing Web Tools for advanced management” on page 45 for information on
launching Web Tools.
Use the command line interface
See the Fabric OS Administrator’s Guide for information on using the command line
interface.
Managing devices
The Devices page displays the following information:
Whether the device is an HBA, an HBA plus storage, or a storage only device.
Device alias name, if one exists.
Vendor name.
Device name.
WWN of the device port.
Switch and port to which the device is connected.
1. Click View under Devices in the task panel to display a table of information for all of the
connected devices (Figure 33).
The entries in the table are based on the device WWNs, so a single physical device can have
more than one entry in the table. The device information can be viewed, copied, or exported.
FIGURE 33 Devices view