![](http://pdfasset.owneriq.net/0/6d/06d21a62-5e70-4993-b7d5-35842bbad5b0/06d21a62-5e70-4993-b7d5-35842bbad5b0-bg30.png)
36 EZSwitchSetup Administrator’s Guide
53-1002157-01
Managing devices
3
• Reboot or power cycle the switch
When the switch is rebooted, the newly licensed ports come up as enabled.
• Use the Advanced Management tool
See “Accessing Web Tools for advanced management” on page 45 for information on
launching Web Tools.
• Use the command line interface
See the Fabric OS Administrator’s Guide for information on using the command line
interface.
Managing devices
The Devices page displays the following information:
• Whether the device is an HBA, an HBA plus storage, or a storage only device.
• Device alias name, if one exists.
• Vendor name.
• Device name.
• WWN of the device port.
• Switch and port to which the device is connected.
1. Click View under Devices in the task panel to display a table of information for all of the
connected devices (Figure 33).
The entries in the table are based on the device WWNs, so a single physical device can have
more than one entry in the table. The device information can be viewed, copied, or exported.
FIGURE 33 Devices view