Filter
Top Products
19
Connecting the Printer to Your Network and Installing the Driver
1 Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2 Select the Network interface.
3 Turn off the printer’s power switch.
4 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
5 Turn on the printer’s power switch.
6 Click the Next button when the movie
finishes.
For Network Interface Cable Users (For HL-6050DN)
For Brother Peer-to-Peer Network Printer Users
(LPR / NetBIOS)
■ If you are going to connect the printer to your network, we recommended that you contact your system
administrator prior to installation.
■ Before installation, if you are using Personal Firewall software (e.g. the Internet Connection Firewall
available in Windows XP), disable it. Once you are sure that you can print, re-start your Personal
Firewall software.
Continue to
the next page
Setting Up
Your Printer
Windows
®
Network
For
Administrators
Installing the Driver
Windows
®
Parallel