Filter
Top Products
11 - 2
PRINTING REPORTS
Using the Quick-Scan/Reports Key
Press Quick-Scan/Reports, press to select the report you want, and then
press Menu/Set.
Seven reports are available:
Prints the Menu Table and programming
instructions so you can see at-a-glance how to
quickly program every menu selection.
Lists names and numbers stored in One Touch
and Speed Dial memory, in numerical order.
Lists information about the last 30 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a Transmission Verification Report for
your last transmission. This information will
remain until you pick up the handset or press
Hook.
Prints the AUTO DIAL list (above) alphabetically.
Lists settings for INITIAL SETUP, SETUP
RECEIVE, SETUP SEND, SETUP
REPORTS and TEL SERVICE.
Lists summary information of stored faxes and
the percentage of used memory.
Note
When you want to print a report, remove all paper from the ADF.
Note
Don’t forget to set up the Fax Activity Report and Transmission Verification
Report as explained on page 11-1.
or
1.HELP LIST
2.AUTO DIAL
3.FAX ACTIVITY
4.TRANSMISSION
5.TEL. INDEX
6.USER SETTINGS
7.MEMORY STATUS