Filter
Top Products
PRINTING REPORTS
11 - 1
11
Printing Reports
Fax Settings and Activity
Two reports require initial setup in the Menu table: Transmission Verification
Report and Fax Activity Report Interval. For initial setup:
Press Menu/Set, 7, 1.
—OR—
Press Menu/Set, 7, 2.
Customizing the Transmission Verification Report
You can use the Transmission Report as proof that you sent a fax. This report
lists the name or fax number of the receiving party, time and date of
transmission and whether the transmission was successful (OK).
1
Press Menu/Set, 7, 1.
2
Press to select ON (or OFF),
and then press Menu/Set.
3
Press Stop/Exit.
Setting the Fax Activity Report Interval
You can set the machine to print activity reports at specific intervals (6, 12, 24
hours, 2, 4, or 7 days). If you set the interval to OFF, you can print the report by
following the steps on the next page.
1
Press Menu/Set, 7, 2.
2
Press to choose an interval,
and then press Menu/Set.
(If you choose 7 days, the LCD prompts you to choose a day at which to begin
the 7-day countdown.)
3
Enter the time to begin printing, in 24-hour format, and then press Menu/Set.
(For example: enter 19:45 for 7:45 PM.)
4
Press Stop/Exit.
Note
When this feature is OFF, the report prints only if a transmission error
prevented delivery (NG).
1.TRANSMISSION
2.ACT.INTERVAL
1.TRANSMISSION
or
2.ACT.INTERVAL
or