Filter
Top Products
6
Turning on/off the printer
1
Press and hold the power
button for a short while, until
the green or blue status indi-
cator light illuminates.
→ When the power comes on, selecting
Bluetooth Switch ON, the status indicator
light will be blue. Selecting Bluetooth
Switch OFF, the status indicator light will
be green. (→ Refer to page 21.)
"
In order to prevent this printer from accidentally being
turned on, it will not come on if the power button is
lightly pressed. Therefore, if the printer does not come
on, hold the power button pressed for a little while.
" In order to conserve the built-in lithium battery
during use, follow the operations below.
!
When the Bluetooth switch is set to “ON”, the printer
automatically enters the sleep mode (
→
refer to
page
21
) if no operation is performed or if no data is sent
to the printer within a specified time. (The length of
time [auto sleep time] until the printer automatically
enters the sleep mode can be specified using the
Utility software. [
→
Refer to the Software Guide.])
!When the Bluetooth switch is set to OFF, the
printer automatically powers off if no operation is
performed or if no data is sent to the printer for
five minutes. (The length of time [auto power-off
time] until the printer automatically powers off can
be specified using the Utility software. [→ Refer to
the Software Guide.])