Filter
Top Products
5 - 10 SETUP RECEIVE
Setting up Sequential Polling Receive
Your MFC can ask for faxes from several fax units in a single
operation (Sequential Polling Receive). Afterwards, a Sequential
Polling Report will be printed.
1
If it is not illuminated in green, press (Fax).
2
Press Menu, 2, 1, 7.
3
Press
or
to select
On
(or
Off
).
Press Set.
4
Enter the fax machines you want
to poll using One-Touch, Speed-Dial, a Group or the dial pad.
You must press
Set between each fax number.
5
Press Start. Your MFC will poll each number or Group number
in turn to receive a fax.
Setting Duplex printing for Fax mode
(For MFC-8820D and MFC-8820DN)
If you set Duplex to On for fax receive, the MFC prints received faxes
on both sides of the paper.
You can use three sizes of paper for this function - letter, legal and
A4.
1
If it is not illuminated in green, press (Fax).
2
Press Menu, 2, 1, 8.
3
Press or to select On (or
Off).
Press
Set.
4
Press Stop/Exit.
While the Duplex printing for fax is working, auto reduction is
also On temporarily.
21.Setup Receive
7.Polling RX
▲ On
▼ Off
Select ▲▼ & Set
21.Setup Receive
8.Duplex
▲ On
▼ Off
Select ▲▼ & Set