Filter
Top Products
2
2
Attachment of the cover
of the control panel
a Attach the cover of the control panel to the
machine.
3
Load plain A4 paper
a Pull the paper tray completely out of the
machine.
b Lift the output paper tray cover.
c With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size you are loading in
the tray.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
d Fan the stack of paper well to avoid paper jams
and misfeeds.
e Check that the paper is flat in the tray.
f Gently adjust the paper side guides to the
paper with both hands.
g Close the output paper tray cover.
h Slowly push the paper tray completely into the
machine.
i While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
3
2
3
1
IMPORTANT
DO NOT push the paper in too far.