Filter
Top Products
Setting Up the Machine
8
7 Print quality check
1 After the cleaning cycle is finished, the LCD
shows:
Set Paper and
q
Press Start
2 Make sure paper is loaded in the paper tray.
Press Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3 Check the quality of the block on the sheet.
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4 The LCD shows:
Is Quality OK?
q
1.Yes 2.No
5 Do one of the following:
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step 6.
6 The LCD shows:
Start Cleaning?
q
1.Yes 2.No
7 Press 1 (Yes), the machine will then start
cleaning.
8 After cleaning is finished, press Start. The
machine starts printing the Print Quality Check
Sheet again and goes back to step 3.
OK Poor