Filter
Top Products
REMOTE FAX OPTIONS
R - 1
Remote Fax Options
Setting Up Fax Storage
Programming Paging Number
When Paging is selected, your fax machine dials the pager number you’ve
programmed, and dials your Personal Identification Number (PIN) when connected,
to activate your pager and let you know you have a fax message in the memory.
1
Press Menu/Set, 8, 1.
2
Press until the LCD shows PAGING?
and then press Menu/Set.
3
Enter your pager phone number (up to 20
digits) followed by # #, and then press
Menu/Set. Do not include the area code if it is
the same as that of your fax machine.
For example,
1 8 0 0 5 5 5 1 2 3 4 # #.
4
If your pager requires a PIN, enter the PIN, press #, press Redial/Pause, enter your
fax number, then press # #, and then press Menu/Set. For example,
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
—OR—
If you do not need a PIN, press Redial/Pause, enter your fax number, then press #
#, and then press Menu/Set. For example,
Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
5
Press Stop/Exit.
You cannot use Paging and Fax Forwarding at the same time.
You cannot use Paging and Fax Forwarding when Fax Storage is set to OFF.
(See Turning On Fax Storage, page R-2.)
You cannot change a Paging number or PIN remotely.
1.FAX FWD/PAGING
PAGING?
or
PAG#: