Filter
Top Products
Troubleshooting
81
6
No Paper Fed Manual Slot If the manual feed slot is empty, put a piece of paper in it.
Make sure you use paper that meets Brother’s recommended paper
specifications. See About paper on page 5.
Load the same size paper that you selected in the current driver setting.
Paper Jam Tray 1
Paper Jam Inside
Paper Jam Rear
Clear the jammed paper from the indicated area. See Paper jams and how to
clear them on page 85.
Toner Life End See Replacing the toner cartridge on page 62.
Toner Low Buy a new toner cartridge and have it ready for when the Toner Life End status
is indicated.
Cartridge Error Make sure the drum unit and toner cartridge assembly is installed properly.
Fuser Cover is Open Close the fuser cover located behind the back cover of the printer.
Drum Life End Soon The drum unit is near the end of its life. Buy a new drum unit to replace the current
one. See Replacing the drum unit on page 69.
Drum Error See Cleaning the corona wire on page 77.
If your LED's still shows the same error indication after you have cleaned the
corona wire, replace the drum unit with a new one. See Replacing the drum
unit on page 69.
Service Call Check the LED indication to identify the error. See Service call
indications on page 53.
Error message Action