Filter
Top Products
7
S
Do NOT connect the interface cable.
You will be prompted to connect the
interface cable during the driver
installation.
Do NOT touch the green surface of
the OPC belt or expose it to direct
sunlight or room light for any length
of time.
1 Remove the protective parts.
2 Open the front cover.
3 Remove the protective part.
4 Take out all the toner cartridges from the
printer.
5 Carefully pull the red protective paper out of
the printer.
6 Rock the toner cartridge 3 to 4 times.
1 Install the Toner Cartridges
Front cover
Go to the next page
Step 1
Setting Up
Your Printer
Windows
®
USB
Windows
®
Parallel
Windows
®
Network
Macintosh
®
USB
Macintosh
®
Network
For
Administrators
Installing the Driver
Setting Up Your Printer