Brother HL-3450CN Printer User Manual


  Open as PDF
of 2
 
Power
Alarm
Secure
Print
Reprint Back Set
Data
HL
-
3450CN
Job
Cancel
Ready
GoGo
NETWORK READYNETWORK READY
KCMY
Ready
Go
Back Set Back SetBack Set
Back Set
Back Set Back Set
Power
Alarm
Secure
Print
Reprint Back Set
Data
HL
-
3450CN
Back Set
Job
Cancel
Ready
GoGo
Ready
Go
NETWORK READYNETWORK READY
KCMY
Back Set Back Set
Install the BRAdmin Professional Configuration utility
Network Quick Setup Guide
If you are going to connect the printer to your network, we recommend that you contact your system administrator prior to
installation.
If you are an Administrator, configure your network printer setting referring to the following instructions.
The default password for the print server is ‘access’. You can use the BRAdmin Professional software or a web browser to change
this password.
To configure the print server refer to the Network User’s Guide.
To change the language settings of the printer do the following.
(All references are to what you will see in the lower portion of the LCD panel.)
Peer-to-Peer Printing
NetBIOS Peer-to-Peer Printing
How to Configure Internet Printing
Novell Netware Printing
TCP/IP Printing
NetBIOS Peer-to-Peer Printing
DLC Printing
How to Configure Internet Printing
Novell Netware Printing
TCP/IP Printing
NetBIOS Peer-to-Peer Printing
DLC Printing
TCP/IP Printing
How to Configure Internet Printing
Novell Netware Printing
UNIX Printing
Macintosh Printing
Macintosh Printing
TCP/IP Printing
NetBIOS Peer-to-Peer Printing
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 2
Chapter 4
Chapter 8
Chapter 5
Chapter 6
Chapter 2
Chapter 4
Chapter 8
Chapter 2
Chapter 5
Chapter 6
Chapter 1
Chapter 7
Chapter 7
Chapter 2
Chapter 4
TCP/IP
NetBIOS
TCP/IP
IPX/SPX
TCP/IP
NetBIOS
DLC/LLC
TCP/IP
IPX/SPX
TCP/IP
NetBIOS
DLC/LLC
TCP/IP
TCP/IP
IPX/SPX
TCP/IP
AppleTalk
TCP/IP
TCP/IP
NetBIOS
Peer-to-Peer
Brother Internet Print
Netware
Peer-to-Peer
Brother Internet Print (NT
®
4.0 only)
Netware
Peer-to-Peer
(Windows
®
2000 only)
IPP (Internet Printing Protocol)
Brother Internet Print
Netware
Windows
®
95/98/Me
Windows NT
®
Windows
®
2000/XP
UNIX/Linux
Macintosh
®
OS2 Warp Server
LAN Server
Macintosh
®
Windows
®
The BRAdmin Professional software is designed to manage your Brother network connected devices. For example, Brother network
ready printers and Brother network ready Multifunction devices can be managed using the BRAdmin Professional software. The
BRAdmin Professional software can also be used to manage devices from other manufacturers whose products support the SNMP
(Simple Network Management Protocol).
For more information on the BRAdmin Professional utility go to http://solutions.brother.com
Network User’s Guide Chapter Map
To print a configuration page, use a fine ball point pen to hold down the
Network Test Button for less than 5 seconds.
If you wish to reset the print server back to its default factory settings
(resetting all information such as the password and IP address information),
use a fine ball point pen to hold down the Network Test Button for more
than 5 seconds.
1
Insert the CD-ROM into your CD-ROM drive.
The opening screen will appear automatically.
Follow the instructions on the screen.
2
Click the Install Software icon
on the Menu screen.
3
Click “BRAdmin Professional.”
Follow the instructions on the screen.
Print Configuration Page
For the Administrator
(For Windows
®
Users Only)
Setting Your Language on the Control Panel
To set the printer IP address using the printer control panel do the following.
(All references are to what you will see in the lower portion of the LCD panel.)
Setting Your Printer IP Address and Subnet Mask (Using the Control Panel)
Factory Default Setting
©2001 Brother Industries, Ltd. ©1998-2001 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED
Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a trademark
of UNIX Systems Laboratories. PostScript is trademark of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple
Computer, Inc.
All other brand and product names are registered trademarks or trademarks of respective companies.
Press the Set button
again.
TCP/IP ENABLE will
be displayed.
READY
READY
192 .0.0.192
*
I P ADDRESS=
I P ADDRESS=
TCP/ IP
TCP/ IPNET
W
O
RK
NET
W
O
RK--MENU--
=ENGLISH
*
LANGUAGE
LANGUAGESETUP
SETUP
--MENU--
0 .0.0.0
*
SUBNET MASK=
SUBNET MASK=
READY
READY
TCP/ IP
Press the Go button to put
the printer back into its
READY state.
4
Press the + button until
SETUP is displayed.
Press the Set button.
1
Press the Set button
again.
2
Scroll through the available languages by
pressing the + or - buttons. Press the Set
button to accept the appropriate language.
An asterisk mark (*) appears on the LCD.
3
Enter your IP address of the printer using
the + and - buttons. Press the Set button
to go to next digit. Press the Set button
to complete the IP address.
An asterisk mark (*) appears on the LCD.
4
Press the + button until
NETWORK is displayed.
Press the Set button.
12
Press the + button until
IP ADDRESS= is
displayed.
Press the Set button.
3
Press the + button until
SUBNET MASK= is displayed.
Press the Set button.
5
Enter your subnet mask settings in the
same way that you entered the IP address.
An asterisk mark (*) appears on the LCD.
6
Press the Go button to put the printer
back into its READY state.
7
For more information refer to the Network User’s Guide on the supplied CD-ROM or go to http://solutions.brother.com
Test Button
 previous